Electrolux Rerigerator Error Codes

Visually, there are no complex malfunctions: sensor failures, leakage of pipes and overheating of the compressor motor. The owner of the refrigerator should pay attention to the information of various indicators. The microprocessor control and monitoring system gives an error code.

In case of any malfunction, an error message appears on the front panel or the LEDs light up.

If the cooler sensors fail, the b, c, d LEDs begin to flash.

Error code F1 or F2 - breakage of the thermostat;

Error code F3, F4 or F5 - NTC temperature sensor failure;

The "-" symbol flashes - the temperature in the refrigerator compartment is below 0 ° C, there may be a malfunction in the cooling system;

The symbol "-" is displayed constantly - the temperature in the refrigerator compartment is above 9 ° C. The reason for the malfunction of the cooling system;

LED b - Evaporator sensor malfunction or refrigerant leakage;

LED c - fault in the temperature sensor;

LED d - malfunction of the thermistor sensor;

LED o (half of digit 8) - the sensor (sensor) of the evaporator of the freezer compartment is broken.

To minor problems of refrigerators include the violation of the tightness of the refrigerator and freezers, violations in the work of various sensors, including temperature controllers.

It is recommended to follow the precautionary measures: do not block the drain holes and overlapping channels of cold air supply, do not open the door for a long time, which can lead to overheating of the compressor.