KOREASTAR Brand History
The company Koreastar is relatively young, has been operating since 2001. Gas boiler Koreastar according to reviews is simple and easy to use. All devices of this company meet the standard ISO 9001.
Koreastar Ace Gas Boilers
The Ace series is a two-circuit wall-mounted gas boilers, which are represented by two Atmo and Turbo positions. Outwardly they do not differ in any way, the difference lies in the construction of the combustion chamber. The Koreastar Atmo gas boiler is equipped with an open (atmospheric) combustion chamber, and the Turbo model is closed (airtight). In the first case, air to maintain the flame is fed from the room, and in the second - from the street. Based on the characteristics of the combustion chamber, a chimney is selected. For the atmospheric is suitable standard sandwich tube, insulated with mineral wool. For a sealed chamber, a coaxial chimney is required.
The characteristics of the gas boiler Koreastar Atmo and Turbo largely coincide. Both boilers have the same power gradation from 10 to 32 kW. A manometer and a manual control unit are installed on the front of the case. There is a built-in German Wilo pump with three speeds, and an anti-lock system is also provided.
A room thermostat and a remote control can be connected to the heaters.
The casing can be painted white or silver. The heat exchanger is made of copper. There is a built-in bypass. A two-level protection against overheating of heat exchangers and an uninterruptible power supply is established.
Koreastar Premium Gas Boilers
This series provides a similar protection system, as in the Koreastar Ace heaters. At the same time, the control is already carried out by the electronic unit, on the front part there is a liquid crystal display and a manometer. The ruler is represented by four items:
Atmo are heaters with an open combustion chamber. In principle, from the series Koreastar Ace Atmo, they differ only in the presence of an LCD display. Boilers with a sealed combustion chamber are available from 10 to 40 kW with a copper heat exchanger for heating and steel for hot water. In the Turbo model, a Wilo pump is installed, and in the Turbo-K and Turbo-C, the Koreastar pump. In addition, the Turbo series is available in two colors (white and silver), and the Turbo-K and Turbo-C are only white.
The technique of how to insulate a chimney pipe with your own hands is simple. To work, you need glass wool and foil.
About how to properly insulate the ventilation, we told in this article.
Models Turbo-K and Turbo-C differ among themselves only in that the first one has a fan for removing gases of increased power. Such units are designed specifically for apartments. On all boilers Koreastar Premium manufacturer gives a guarantee of 3 years.
Koreastar Senator Gas Boilers
In this lineup there are two floor models: Senator-D and Senator-TP. They differ not only in design, but also in the principle of work. In fact, they are absolutely different devices. So, Senator-TP is equipped with an open type combustion chamber. This unit is not dependent on electricity. The heater is controlled by the automation of SIT and Honeywell. The boiler is made of cast iron from Viadrus. Capacity from 10 to 60 kW. Can work in both hermetic and gravitational systems.
Electronic automation.
The Senator-D boiler is available with an open combustion chamber, but it is already dependent on the electrical network. Characteristics of the boiler Koreastar from the instructions:
Gas Boilers Koreastar Buran
In this series there is only one unit. The Koreastar Buran gas boiler is installed on the floor, it is single-circuit, it does not depend on electricity and can work with open and closed heating circuits. At the same time, they are very reliable and deserve a good reputation.
From the Koreastar Senator series, the Buran model features a heat exchanger material that is made of steel. While in the boiler the Senator heat exchanger is made of high quality cast iron. Buran can only run on natural gas. The gas pressure should be not less than 6 mbar, and the coolant should not exceed 0.4 mbar.
The maximum temperature is 90 degrees. At ignition, due to the fact that the temperature of the coolant is below 30 degrees, condensation may form. This leads to corrosion, so do not allow such a decrease in the water temperature in the circuit. Before the heating season, the device must be checked for serviceability, if necessary, clean the heat exchanger and chimney.